MakerWorld gift curation
3D printed gifts under S$20
If you want a small 3D printed gift under S$20, start with low-material models: a 1.5 g fidget spinner, a 3 g mini bear, a 4 g puppy ring, a small heart keychain or an 11 g miniature sign. These are budget targets, not guaranteed menu prices. PrintYa describes small prints as starting from S$8, but a person reviews the file and sends the Final Quote before anything is charged. Send one STL, 3MF or OBJ file up to 50 MB, in PLA and within a 256 × 256 × 256 mm envelope; we aim to reply within one business day.
The ten ideas below are real MakerWorld models with their own images and designer credit. Check the linked licence before you commission a paid print: most pages show Standard Digital File or commercial-membership restrictions. Have permission and a file ready? Send it for a quote.
At a glance
“Under S$20” works best as a shortlist for small, simple prints. It is not a promise that every model below will receive a quote at that amount; colour, size, assembly, quantity and fulfilment can change the result.
| # | Model | Best for | Budget signal |
|---|---|---|---|
| 1 | Mini Fidget Spinner - Really Works! 1.5g By D3signLane | Tiny desk gift | Best chance under S$20 |
| 2 | Puppy Ring By liupeiyty | Wearable novelty | Best chance under S$20 |
| 3 | Small Heart Keychain By brintonjamespaulson15 | Keepsake keychain | Best chance under S$20 |
| 4 | Daisy Flower Customisable Name Keychain, Bagcharm By bloominghandy | Personalised bag charm | Quote first |
| 5 | Mini Angry Duck - Desk Buddy & Keychain By The3DGuy | Desk buddy | Best chance under S$20 |
| 6 | Fidget Ring Ultra Fast / Spin Edition By Matlock | Wearable fidget | Quote first |
| 7 | Heart Container - Cute Storage Organizer with Lid By Anton | Small storage | Quote first |
| 8 | Mini Infinite Cube By fifindr | Mini desk decor | Best chance under S$20 |
| 9 | I Love You Miniature Sign By HumbleBee | Card-sized surprise | Best chance under S$20 |
| 10 | Cute Mini Bear - Figurine / Keychain By Rusty Tractor | Tiny character gift | Best chance under S$20 |
The ten gift ideas
Image from the MakerWorld model page. 01 / Tiny desk gift
Mini Fidget Spinner - Really Works! 1.5g
Designer: D3signLane
Why it makes a good gift: A pocket-sized stocking filler, desk fidget or small prize-box gift that feels surprisingly mechanical for its size.
What the page says: The page says it uses 1.5 g of filament and measures about 26 mm long by 14 mm tall. A short piece of filament, about 12 mm, acts as the bearing.
Before you print: The tiny bearing and moving fit need a clean, calibrated print. The designer points to a commercial licence for selling physical prints.
Licence: Standard Digital File License; paid physical use needs permission or the designer's commercial licence. Check the current model page and get permission where needed.
View model on MakerWorld ↗
Image from the MakerWorld model page. 02 / Wearable novelty
Puppy Ring
Designer: liupeiyty
Why it makes a good gift: A playful little ring for a dog lover, party bag or novelty gift where a tiny print is the point.
What the page says: The model title says it uses only 4 g of material. The page includes smooth and furry versions, and says the default ring size suits an adult man; children may need scaling.
Before you print: Confirm the wearer's size before printing. A ring is a fit-sensitive object, so scaling and the intended use matter more than the picture.
Licence: Standard Digital File License; ask for permission before paying for a physical print. Check the current model page and get permission where needed.
View model on MakerWorld ↗
Image from the MakerWorld model page. 03 / Keepsake keychain
Small Heart Keychain
Designer: brintonjamespaulson15
Why it makes a good gift: A simple token for a friend, partner, family member or pet-name tag that can be printed in a colour chosen for the recipient.
What the page says: The designer describes it as a super-quick print that uses barely any plastic and says it can be scaled up when a larger heart is wanted.
Before you print: Check the keyring hole and intended scale; the linked page is a lightweight design, not a heavy-duty hardware replacement.
Licence: Standard Digital File License; paid physical use needs permission. Check the current model page and get permission where needed.
View model on MakerWorld ↗
Image from the MakerWorld model page. 04 / Personalised bag charm
Daisy Flower Customisable Name Keychain, Bagcharm
Designer: bloominghandy
Why it makes a good gift: A name tag for keys, a school bag, a lanyard, a teacher gift or a small birthday and party-bag favour.
What the page says: The page offers one- or two-line editable text and custom colours, and tells makers to edit the file in Bambu Studio rather than the mobile app.
Before you print: Prepare the exact name and colour before sending the file. Personalisation and a two-colour version can change print time and the quote.
Licence: Standard Digital File License; the designer points to a commercial membership for physical prints. Check the current model page and get permission where needed.
View model on MakerWorld ↗
Image from the MakerWorld model page. 05 / Desk buddy
Mini Angry Duck - Desk Buddy & Keychain
Designer: The3DGuy
Why it makes a good gift: A cheerful desk companion or small keychain for someone who likes novelty objects with a little attitude.
What the page says: The current page describes a support-free design that works as a keychain or desk buddy, prints in one or multiple colours and scales well.
Before you print: Choose one colour if the budget is tight, and check the keychain hole after scaling so it remains usable.
Licence: Standard Digital File License; the page mentions a commercial membership for commercial use. Check the current model page and get permission where needed.
View model on MakerWorld ↗
Image from the MakerWorld model page. 06 / Wearable fidget
Fidget Ring Ultra Fast / Spin Edition
Designer: Matlock
Why it makes a good gift: A tactile gift for someone who likes a small desk or pocket object that can be spun during a pause or commute.
What the page says: The page lists an 18 mm standard inner diameter, with scaling guidance for other sizes. The cage and ring print separately and are pressed together after printing.
Before you print: The designer says tolerances are very fine and printer calibration is crucial. Confirm the ring size and allow for two parts and assembly.
Licence: Standard Digital File License; paid physical use needs permission. Check the current model page and get permission where needed.
View model on MakerWorld ↗
Image from the MakerWorld model page. 07 / Small storage
Heart Container - Cute Storage Organizer with Lid
Designer: Anton
Why it makes a good gift: A bedside or desk container for rings, sweets, hair ties, small stationery or other little things that deserve a home.
What the page says: The lid has a built-in handle and prints as a single piece without supports. The page offers single-colour and two-colour profiles, including a manual filament-swap version.
Before you print: Keep the size and colour plan simple if you want the best chance of staying near the budget; confirm what the file's selected profile contains.
Licence: Standard Digital File License; paid physical use needs permission. Check the current model page and get permission where needed.
View model on MakerWorld ↗
Image from the MakerWorld model page. 08 / Mini desk decor
Mini Infinite Cube
Designer: fifindr
Why it makes a good gift: A minimalist shelf or desk ornament for someone who prefers geometric decor to a character or personalised gift.
What the page says: The page lists 20 mm, 25 mm and 30 mm versions and describes a fast print with low material use. It is a geometric loop with no obvious start or end.
Before you print: The page says to remove supports carefully with pliers. Pick a size and colour before sending the file; the 20 mm version is the budget-minded starting point.
Licence: Standard Digital File License; the page points to a commercial licence membership. Check the current model page and get permission where needed.
View model on MakerWorld ↗
Image from the MakerWorld model page. 09 / Card-sized surprise
I Love You Miniature Sign
Designer: HumbleBee
Why it makes a good gift: A tiny romantic surprise that can sit on a desk or slip inside a greeting card without becoming the whole present.
What the page says: The page gives a print time of 32 minutes, material use of 11 g and an approximate height of 2 inches. A small support piece snaps in to hold the sign open.
Before you print: Press the support bar into place carefully; it is intentionally a small, light object rather than a freestanding heavy sign.
Licence: Standard Digital File License; paid physical use needs permission. Check the current model page and get permission where needed.
View model on MakerWorld ↗
Image from the MakerWorld model page. 10 / Tiny character gift
Cute Mini Bear - Figurine / Keychain
Designer: Rusty Tractor
Why it makes a good gift: A tiny bear that can be a desk figurine or keychain, useful when you want a cute gift with minimal filament and no large display footprint.
What the page says: The page says it uses 3 g of filament, takes about 16 minutes on an X1C, needs no supports, and is tested in PLA as a single-colour print.
Before you print: Choose the keychain or figurine profile before exporting the file, and keep the small parts away from young children.
Licence: Standard Digital File License; the designer points to a commercial membership for selling prints. Check the current model page and get permission where needed.
View model on MakerWorld ↗
How to keep the gift near S$20
- Start small. Choose a model whose page gives low material use or a short print time. A tiny keychain and an articulated multi-part object are very different quote requests.
- Keep the file simple. One colour, one copy, no extra hardware and no complicated assembly gives the best chance of staying near a small-print budget.
- Prepare the right file. PrintYa accepts one STL, 3MF or OBJ file up to 50 MB per enquiry, within a maximum 256 × 256 × 256 mm envelope. Personalise the file before sending it.
- Check permission first. A free MakerWorld download is not automatically permission to sell, outsource or fulfil a physical print. Keep the designer's permission or commercial licence with your enquiry.
- Choose fulfilment after the quote. PrintYa is PLA only; collection is by appointment and Singapore courier is quoted separately. Nothing is charged or printed until you approve the Final Quote.
Frequently asked questions
Can you guarantee a 3D printed gift will cost under S$20?
No. S$20 is a useful target for small, low-material gifts, not a fixed PrintYa menu price. Small prints are described as starting from S$8, but the actual Final Quote depends on the model, size, colour, quantity and fulfilment details. A person checks the file and confirms the price before anything is charged.
Which gifts have the best chance of staying under S$20?
The strongest candidates are the tiny models whose pages state very low material use or short print times, such as the 1.5 g fidget spinner, 3 g mini bear, 4 g puppy ring, small heart keychain and 11 g miniature sign. They are still quote-first ideas, not guaranteed prices.
Can PrintYa print a MakerWorld gift model for me?
Only when the current model licence or your own permission allows a paid physical print. The linked pages show Standard Digital File or other restrictions, and some point to a commercial membership. Send the one file and the permission context; PrintYa reviews both the print and the licence question before quoting.
Can PLA gifts be used with food, heat or young children?
Do not assume a normal PLA print is food-safe, dishwasher-safe, microwave-safe, heat-safe or suitable as a chew toy. Avoid hot liquids, food contact and small parts around young children unless the intended use has been independently assessed. PrintYa prints PLA only and does not certify a household or toy product.
Can I personalise one of the keychains?
Several linked MakerWorld pages describe editable text or custom colours, but the file must be prepared in the form you want to print before the enquiry. PrintYa accepts one STL, 3MF or OBJ file per enquiry and quotes the file a person receives; include the name, colour and any special notes in the conversation.
How quickly can I get a small gift printed?
PrintYa aims to reply with a confirmed quote within one business day. Accepted prints typically take 2–4 business days after verified payment, while unusual work receives a confirmed date. Collection is by appointment and Singapore courier is quoted separately.
Last updated 22 August 2026. Sources: the MakerWorld small-gift model search, the ten linked MakerWorld model pages above, and MakerWorld's user agreement. Model images are credited to their linked pages and stored locally for this article rather than hotlinked. Model versions, popularity and licence terms can change; check the current page before requesting a paid print.